Tuesday 29 January 2013


RevingtonTR's Heater Control Valve-Suitable for more than just TR's
Cabin operated Heater Water Valve Kit, includes all Fittings and Instructions. These kits enable accurate control of heater water flow from within the cabin via a precision inline valve.

TR2-3Bs don't have a valve that is accessible from the cabin at all, all that is available is a crude tap located in the engine bay. This kit introduces an inline valve allowing control of the heater from within the cabin using the cable and knob included in the kit. When this heater valve kit is fitted the heater tap on the engine block will no longer be needed and can be replaced with feed pipe kit RTR1491K. 

In-line valve and knob
This clever inline valve (inline meaning it sits in the water hose) has an internal water flow regulating tumbler with a cleverly designed aperture shape. This means that increase in water flow is proportional to lever movement, providing sensitive control of heater water flow with a very smooth, friction free operation.

RTR1486-1K TR2-3 with Clayton Heater conversion fitted

 There are 3 kits available, the first suits TR2-3B with our Clayton Heater fitted, the second fits TR4-6 with a standard heater fitted and the third kit fits TR2-3B with the standard heater fitted. The third kit is also a universal kit, allowing it to be fitted to any car requiring a valve as it includes: valve, adaptor hoses to suit 13, 16 and 19mm pipe work, clips and fitting as well as a 1m long operating cable.
RTR1486-2K TR4-6 Standard Heater

RTR1486-3K TR2-3 Standard Heater
For more information on the heater control valve please click on the link below.

For information on heater conversion kits please click on the link below.

Call +44 (0)1823698437 for more infomration or email info@revingtontr.com

No comments:

Post a Comment

Please leave a comment below, either log into one of the listed accounts, or create an account. If you wish to post without an account select Name/URL or post anonymously.