Wednesday, 21 December 2011

The Logical Device to Fit - if you have an Overdrive


Logic overdrive devices.

I have read with some amusement all the too-ings and fro-ings on this subject with some correspondents making it all sound desperately difficult.
What is the background? Well, when Revington TR was called TR Spares Southwest in 1982 ish, I designed a device to allow me to change gear and overdrive at the same time specifically with racing in mind but obviously I found that the device was a fantastic improvement on all cars both road and competition. I called this device a ’Logic Overdrive device’ (sound familiar?)
Initially the device was constructed of basic electrics but has since been redesigned and is now fully electronic.
RTR1001K
RTR1296NK
RTR8436
So how does it operate and how do you fit it? There is no need to remove the gearbox tunnel, the box of tricks and all the other fittings that come in the kit (which comes with full instructions), is wired into the existing wiring from the gearbox tunnel upwards to the switch and original relay (pre CF CR TR6 cars). A flick switch RTR8436 is used to operate the system and in the case of TR4-6 the original switch can be modified to become a flick switch (Meaning momentary operation with self-return). The modus operandi is this: Whatever gear or state of overdrive the car is in when the ignition is turned off, the overdrive will be off when you turn on the ignition again. When overdrive is required (in an overdrive enabled gear of course), flick the switch. When a non-overdrive gear is required from an overdrive gear, flick the switch. If a fast change is required from say 2nd overdrive to non -overdrive 3rd , just move the gear lever to 3rd and the logic device will disengage overdrive for you as you pass through the gear shift gate. This applies to any gear change up or down the gearbox where the start point was an overdrive gear.
We recommend a light on the dash to identify the overdrive state.  And it is worth noting that both negative and positive earth devices are available.

Two types of kits are available RTR1001K which is a basic unit suitable for both positive and negative earth and RTR1296NK, RTR1296PK which provide a facility to dim the indicator lamp independently for both day and night. The ‘N’ and the ‘P’ in these part numbers indicates negative and positive earth variants.
To find out prices and more, just click on the part numbers above or type these part numbers into the search box on our website www.revingtontr.com 
That is the history and I can confirm these units have been sold by their thousands and continue to work faultlessly in many applications (not just TR’s) around the world, so now there is no need to go searching for components to build a device that may or may not work, it has all be designed for you and been field tested in thousands of cars for the last 30 years.

J. Neil Revington

Knobs and nuts - For your TR4-6.

RevingtonTR have now sourced a new high quality spherical gear knob for TR4-6 (Fitted up to CP53853) part number 131246. The Spherical knob is made in a hard plastic and has a metal insert to ensure it can be securely fixed to the gear lever using one of our  new shiny nuts NP505064. It has a smooth finish with no uncomfortable moulding lines so it feels smooth to the touch. This will give your TR the original look and also ensure the knob fits securely and correctly. The knob has a plain top with no gear position markings. Click here to go to the gearknob. There is also now a stainless steel locknut for the TR2-3A gearknob. The nut can be polished to get a shiny finish. See part number 109047. Click here to view 109047

Wednesday, 14 December 2011

RevingtonTR - Bosch PI Specialists

At RevingtonTR we have been repairing standard PI installations and designing and installing our own Bosch fuel pump kits for many years. Our design has been copied by many but we believe never bettered. With a wealth of experience from our own workshops and working with an approved Bosch distributor we are able to design the best installation for your TR. There have been several changes to Bosch fuel pumps over recent months that have led to some poor supercessions in pump specifications from various suppliers. Working with our Bosch distributor we have ensured our pumps are the correct specification for the intended purpose. Our kits have pumps with the correct flow rates and pressures to ensure your PI system operates with optimum performance. A tap also ensures the system can be isolated if required. A see through filter to help initial installation (which is later replaced with an aluminium sleeve) helps servicing and enables you to visually check for fuel contamination. Our hoses and fittings are also made specifically for our installation by a local manufacturer. Tight quality control and high quality parts ensure you get  great performance from  a RevingtonTR Bosch Fuel pump conversion. Finally, being fitted in the wheelarch ensures unwanted fumes are kept out of the boot.Other kits may look similar but ours is the real thing

Our latest kit is  RTR4050XK  (click on the part number to see more detail).  It really is a must if you are considering a Bosch conversion.

Check out our web site for more details or give us a call on 01823698437 or e mail info@revingtontr.com

Tuesday, 6 December 2011

2011 - Where did it go?

What a year, it has just flown by so quickly. Once again  we have had a busy year at RevingtonTR. Despite the tough economic situation around the world we are pleased to announce there is still a strong TR market out there. We have seen demand grow from area's with a strong currency particularly Australia. Our presence in the market place as TR specialists is spreading to more distant shores and we are seeing our shipments overseas grow. Parcel size to overseas markets has been a problem as many shippers ship on volume rather than weight. We will endeavour to keep shipping costs down during 2012.


RevingtonTR Christmas Opening Times

Get Your Orders In Early
Like most other people RevingtonTR will be taking a chance to catch their breath over the Christmas holiday period. We will be open until lunchtime on the 23rd December. We will then be closed and re open on the 3rd January, recharged and ready to go. During the closed period you can order on line but orders will not be despatched until we return on the 3rd January. If you think you will need something over the Christmas  period please let us know in plenty of time.
Have a great Christmas or if its not your thing just enjoy the holiday.
Thanks for your support during 2011 and we hope to hear from you again soon in 2012. Seasons Greetings from all of the team at RevingtonTR.

Monday, 5 December 2011

Revington TR Gift Tokens

Ideal Gift for the TR Owner in your life


If you are stuck for Christmas gift ideas for your TR owning partner, family member or friend, what could be better than a Gift Token from Revington TR. Or maybe a nudge from you if you own a TR to suggest this is what you would like this Christmas. The tokens are redeemable against any parts from RevingtonTR's extensive list of standard or modified parts. Make your loved ones Christmas special by giving them a RevingtonTR gift token. Available in denominations of £5, £10, £25 and £50.
Click on the link below to purchase yours today.
Click here to go to Gift tokens