Friday, 28 September 2012

No need for Anti Freeze This Winter

Use Evans Classic Cool 180

Since the launch of  Evans Classic Cool we have been asked the same questions many times, "does it work" and the answer is a resounding "YES"! RevingtonTR would not offer anything for sale without testing it first. So Evans Classic Cool was put to the test in Neils own car, undergoing extensive testing and evaluation. It has prooved itself in rallies and extended driving under arduous conditions. Neil was delighted with the results and had to make it available to the rest of the market place. With winter coming I'm sure your considering what antifreeze might be required.

Instead of using anti freeze, now is the time to make the move and change to Evans. 
No need to use anti-freeze EVER again when Evans Classic Cool is used.

The coolant is completely water free and therefore will not freeze all the way down to -40 deg C, it will not boil all the way up to 180 Deg C and  there will be no corrosion due to there being no water! It operates at much reduced pressure thus improving the longevity of hoses, the water pump, seals and other cooling system components.

The system has to be free of water to work effectively so some preparation is required. (Prep fluid is not required if the engine is dry ie after a rebuild and had no water in the system).This is carried out using Evans Prep Fluid. Evans prep fluid is used to condition the system, its primary role is to remove water from the system. 5 litres will be enough for systems up to 8 litres capacity.  

The system is then filled with the correct amount of Evans Classic Cool 180, which is available is multiples of 5 litres.

For reference TR's have the following capacities: -

TR2-4A approximately 8 litres

TR250, 5, 6 approximately 6.5 litres

TR7 approximately 7.6 litres

TR8 approximately 11 litres

Remember it is not only TR's or Classics that Evans 180 works with. Any car or motorbike, classic or modern will benefit from this product. In addition we can supply Vintage Cool 180 which is specially formulated to suit vintage cars and motorbikes as well as Power Cool 180 which is suitable for racing cars and motorbikes. Further information is available from RevingtonTR. Click on the link below for more infromation or

call +44 (0)182369847 or



Click Here for Prices and more detail

Thursday, 27 September 2012

Keep Warm This WInter

RevingtonTR's Heater Kits - Real Winter Warmers

It's not yet winter but its on its way. If you want a more comfortable driving experience when the temperature drops you should fit one of RevingtonTRs uprated heater kits. With several options to choose from for TR2-3 and TR4-6 we can guarantee you will have a much higher heat output from these heaters than the standard heater. These high output heaters have 4kw of heat to keep the cold at bay and keep you a lot warmer than the original that generates only a luke warm breeze .

This is one upgrade that we find most ladies approve of, drivers or passengers!
RTR1395K TR2-3 Kit

RTR1396-1K TR4-6  DIY kit

RTR1396-2K TR4-6 including Heater Case

Some suppliers kits do not include everything you need to fit their heaters. RevingtonTR's kits include, Brackets in the  TR2-3B kit to support the assembly, wiring and swithces. Complete with fitting instructions this kit is as complete as we can make it.  Call if in doubt.
Check out the attached link and get your order in early.
Heater Uprade TR4-6 DIY kit
Heater Upgrade TR4-6 Including Heater Case

If you are fitting the heater you might also want to consider our recently released control valve kit. This gives a smooth controllable progressive opening of the valve. It actually allows control of the heat output and is not just an on /off switch like the original can be, when it works. The kit numbers for your car are listed below.
                                            RTR1486-1K TR2-3B with an RTR Heater Kit

                                            RTR1486-2K  TR4-6 with a standard heater

                                                 RTR1486-3K  TR2-3B standard heater 
                                                 also a  universal kit  for  other marques.

Click here   for Heater Valve Kits

These modifications are a great addition to your car and will improve your driving experience on cool summer nights or cold winter days. Contact us today to order your heater upgrade kits and enhance your TR driving experience.

Check out the web site for more details at
Or e mail or call 01823698437.

Friday, 7 September 2012

RevingtonTR - Making New Connections

Connector Block 150640

RevingtonTR previously manufactured this connector to supply to the trade and retail. It has been unavailable for several months. We are now very pleased to announce that the connector will be available again at the end of September 2012.

                   3D "X-Ray" Of  The Connector

The connector is a direct replacement for TR6 part 150640 and is identical in every way. The outer shell is white plastic with a 4 way connector embedded inside. It is intended to connect 4 heavy duty cables together via 9.5mm Lucar connectors. This connector will be useful for ANY car where an alternator conversion is being fitted or simply where up to 4 heavy duty cables need connecting together.

This connector offers a tidy and neat solution for connecting 4 heavy duty wires together using 9.5mm Lucar terminals. It can also offer additional connections if only two or three connections are in use presently enabling additional applications to be connected safely such as RevingtonTR's Auxiliary fuse box kit RTR8170K. So, by using this connector you can eradicate untidy and potentially dangerous connectors and installations
On cars where there is no easy way of connecting to the main electrical feed wire (usually a thick brown wire) this can be cut and the connector introduced with 9.5mm Lucar terminals crimped onto the brown wires to allow for additional services. 

Connector in packaging

This item is a great little connector that has been missing from the market place for some time.

Order Here

150640 is priced at only £9.45 exc vat or £11.34 inc vat. You can order directly from RevingtonTR on our web site at  or from any good TR Parts supplier.
Call 01823698437 or e mail for more information